Replacement Media, HydroKleen® Activated Carbon Filter Bag

UltraTech 9463 Replacement Activated Carbon Filter Media is used to remove trace chemicals and odor, as well as to polish out any hydrocarbon sheen. Captures multiple pollutants. Designed for use in an UltraTech® HydroKleen® filter basin. As a general rule of thumb, UltraTech recommends the filters be changed out every six months.

Features:

• Good polishing media helps in removing chemicals, odors and hydrocarbons.
• Different types of media filters can be used depending on what you intend to filter out.

Ordering Assistance for HydroKleen® filters:

An Ultra-HydroKleen® filter chamber holds up to three filter media bags. No filter media or filtering system is 100% effective. The Ultra-HydroKleen® meets the EPA's definition of a BMP that helps an end user reduce stormwater pollutants to the maximum extent practicable (MEP). Results will vary based on local conditions and the extent of a maintenance program.

1. Our standard filter media configuration is two bags of Sorb-44 (UT-9462) for hydrocarbon removal and one bag of Activated Carbon (UT-9463) for removing many types of trace chemicals, hydrocarbons and polishing of hydrocarbons.
2. Filter media bags can be ordered individually to create a matrix of media to remove different types of pollutants. These choices are below.
3. In many cases it is recommended that you place a Sorb-44 hydrocarbon removal filter bag in the initial (top) filter bag position to pull off oil and other hydrocarbons before these pollutants can reduce the effectiveness the other filter media below the Sorb-44 bag.