Rectangular Carboy, 20 Liter (5 gal) HDPE, Tamper Evident, Stackable with 70mm Buttress Cap
- Part Number:
- SW-20010RC_BLUE
- Lead Time:
- 2-3 days
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- each
- Size:
- 20 liter / 5 gallon
- Color:
- natural
- Material:
- polyethylene
- Style:
- tube
- Shape:
- rectangular
Bulk discount rates
Automatically save when you buy in bulk.
| Buy 6 - 11 | and get 10% off |
| Buy 12 or above | and get 15% off |
Description
Rectangular Carboy, 5 gallon HDPE, 70mm buttress closure with gasket, fits ECO Funnel® models EF-4-SW and EF-8-SW. Graduated in gallons along the side, natural color. This Jerrican pail also features a small back closure to allow for easy venting and smooth pouring.
- Made in the USA
- Dimensions: 14" H x 9" W x 10 1/6" L
- Finish Style: 70mm buttress with secondary vent access closure
- Closure: Polyseal cap, C18/400 FRST polypropylene, white
- Material: High Density Polyethylene
- Liner: laminated PE Foam liner, glued in
Packaging Suitability
1. Packaging has been certified for Packaging Group II and III liquids with specific gravities not exceeding 1.8
2. The internal pressure test required for air shipment has been conducted
Test Level = 100 kPa (14.5 psi; refer to 173.24a(b) (4))
It is the shipper's responsibility to ensure that:
1. The packaging is authorized for the intended hazardous material.
2. The packaging is compatible with its lading, and
3. The packaging meets all general shipper requirements of 173.24 and 173.24 (a)
Packaging Assembly:
1. Once filled, the primary closure must be applied to the bottle using an application torque of 120 in-lbs (10 ft-lbs) using a torque wrench with force indicator.
2. Once filled, the packager must ensure that the vent access closure is hand tightened on the Jerrican to preclude loss in shipment.
Note: Failure to follow the packaging assembly instructions listed above may render the UN certification invalid
UN Marking
3H1 / Y1.8 / 100 / **
USA / +AA2647
Marking Explanation
3H1 Packaging Identification Code 3H1, Jerrican, Plastic, Closed Head
Y Packaging has been certified at Packaging group II, Test Levels (Y) which covers Packing Group II & III liquid hazardous materials
1.8 Maximum product Specific Gravity 100 Denotes Internal Test Pressure of 100 kPa (refer to 173.24a(b) (4) ) ** Insert 2 digit year the packaging was manufactured ("08" = 2008)
USA Country authorizing allocation of the marking
+AA2647 Packaging tested and certified by a DOT Third Party Certification Agency