PowerForm® PF-95GW Nitrile Exam Gloves, Dual-Color Green/White 5.9 mil Sustainable, Skin-Improving, case/500

Experience EnerGel infused gloves, designed to hydrate skin and protect against long-term glove usage. EcoTek gloves tested to ASTM D5526-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions. Results are 92.6% biodegradation in 60% solids landfill at 945 days. Future results cannot be predicted/extrapolated.

Features:

• EnerGel® Hand Conditioning Technology hydrates and soothes skin, proven to prevent many skin ailments
• EcoTek® Sustainable Technology
• Breach Alert® Visual Detection Technology provides durable 2-ply construction and contrasting inner color
• Proven resistance to fentanyl and gastric acid for over 4 hours to replicate hazardous settings and overdose conditions
• Fully textured for secure grip
• Silicone-free for critical environments
• 1.5 AQL exceeds laboratory standards

Properties:

• Inner Surface: EnerGel / Breach Alert
• Outer Surface: Fully Textured
• Cuff Finish: Beaded
• Fit Type: Ambidextrous
• Length: 9.5" / 242 mm
• Finger Thickness: 5.9mil / 0.15mm
• Palm Thickness: 4.9mil / 0.13mm
• Tensile Strength Before Aging: 18 MPa
• Tensile Strength After Aging: 18 MPa
• Elongation Before Aging: 550%
• Elongation After Aging: 500%
• AQL: 1.5

Compliance:

• EN ISO 21420:2020
• EN 455:2000-2015
• ASTM D6319-19
• ASTM D6978-05 (2019)
• ASTM F1671-13
• ASTM F739-12
• Reach EU 1907/2006
• EU 2016/425
• CAT III Complex Design
• UL NFPA 1999-2018
• FDA 21 CFR 177.2600

Viral Protection

SW gloves have been successfully tested against the stringent US and EU viral penetration test standards, thus giving stakeholders a high level of protection from viruses, bacteria and fungi. This reduces or eliminates the risk of exposure to biological hazards and guarantees quality of every glove produced. ASTM F1671 is the standard used in North America. It is a pass or fail test designed to show whether the material can protect a wearer from viruses transmitted via blood or bodily fluids. EN ISO 374-5 Virus standard, is the standard in Europe. It measures the ability of gloves to protect from bacteria, fungi and virus penetration using ISO 16604 as the test method.

SKIN HEALTH ALLIANCE APPROVED WORLDWIDE

SW® nitrile gloves have been clinically tested and proven to have reduced potential to cause skin irritation. This protection creates a cleaner glove with reduced chemical residues, removes the user's risk of allergic reactions, and will not induce contact dermatitis or Type IV hypersensitivity reaction.& To achieve a 510K Certification, a medical grade glove must meet ASTM and FDA standards. Tested by an FDA registered and certified US laboratory and headed by a board-certified dermatologist. Testing was conducted on a minimum of 200 human subjects, to qualify for the Low Dermatitis Claim.

• dermatologist tested
• skin safe products
• global standard adherence
• low environmental impact
• independently assessed