LDPE Chemical Compatibility

 

LDPE Chemical Compatibility Chart: Check the chemical compatibility of LDPE (low density polyethylene) with various chemicals, solvents, alcohols and other products.

LDPE is defined by a density range of 0.910–0.940 g/cm3. It is not reactive at room temperatures, except by strong oxidizing agents, and some solvents cause swelling. It can withstand temperatures of 80°C continuously and 95 °C for a short time. It is flexible and tough, but breakable. LDPE's intermolecular forces are weaker, its tensile strength is lower, and its resilience is higher than HDPE.

  • Excellent resistance (no attack / no chemical reaction) to dilute and concentrated acids, alcohols, bases and esters
  • Good resistance (minor attack / very low chemical reactivity) to aldehydes, ketones and vegetable oils
  • Limited resistance (moderate attack / significant chemical reaction, suitable for short-term use only) to aliphatic and aromatic hydrocarbons, mineral oils, and oxidizing agents
  • Poor resistance and not recommended for use with halogenated hydrocarbons.

Shop LDPE

Please Note: The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility. ALWAYS test your equipment under the specific conditions of your application before permanent installation.
Ratings of chemical behavior listed in this chart apply at a 48-hr exposure period. We have no knowledge of possible effects beyond this period. We do not warrant (neither express nor implied) that the information in this chart is accurate or complete or that any material is suitable for any purpose.

©CP Lab Safety. All Rights Reserved.

Chemical Compatibility
Acetaldehyde C-Fair
Acetamide A-Excellent
Acetate Solvent A-Excellent
Acetic Acid A2-Excellent
Acetic Acid 20% A-Excellent
Acetic Acid 80% D-Severe Effect
Acetic Acid, Glacial D-Severe Effect
Acetic Anhydride D-Severe Effect
Acetone B1-Good
Acetyl Bromide D-Severe Effect
Acetyl Chloride (dry) D-Severe Effect
Acetylene D-Severe Effect
Acrylonitrile A-Excellent
Adipic Acid A-Excellent
Alcohols: Amyl B2-Good
Alcohols: Benzyl D-Severe Effect
Alcohols: Butyl A-Excellent
Alcohols: Diacetone B1-Good
Alcohols: Ethyl B-Good
Alcohols: Hexyl A-Excellent
Alcohols: Isobutyl A2-Excellent
Alcohols: Isopropyl A2-Excellent
Alcohols: Methyl A1-Excellent
Alcohols: Octyl A-Excellent
Alcohols: Propyl A2-Excellent
Aluminum Chloride B2-Good
Aluminum Chloride 20% B2-Good
Aluminum Fluoride A2-Excellent
Aluminum Hydroxide A2-Excellent
Aluminum Nitrate A2-Excellent
Aluminum Potassium Sulfate 10% A2-Excellent
Aluminum Potassium Sulfate 100% A2-Excellent
Aluminum Sulfate A2-Excellent
Alums A-Excellent
Amines C1-Fair
Ammonia 10% C1-Fair
Ammonia Nitrate A-Excellent
Ammonia, anhydrous B2-Good
Ammonia, liquid C1-Fair
Ammonium Acetate A-Excellent
Ammonium Bifluoride A2-Excellent
Ammonium Carbonate B2-Good
Ammonium Caseinate N/A
Ammonium Chloride A2-Excellent
Ammonium Hydroxide A1-Excellent
Ammonium Nitrate A1-Excellent
Ammonium Oxalate N/A
Ammonium Persulfate A2-Excellent
Ammonium Phosphate, Dibasic A2-Excellent
Ammonium Phosphate, Monobasic A-Excellent
Ammonium Phosphate, Tribasic C-Fair
Ammonium Sulfate A1-Excellent
Ammonium Sulfite B2-Good
Ammonium Thiosulfate A-Excellent
Amyl Acetate C1-Fair
Amyl Alcohol B2-Good
Amyl Chloride D-Severe Effect
Aniline C-Fair
Aniline Hydrochloride D-Severe Effect
Antifreeze N/A
Antimony Trichloride B2-Good
Aqua Regia (80% HCl, 20% HNO3) B1-Good
Arochlor 1248 C1-Fair
Aromatic Hydrocarbons C-Fair
Arsenic Acid B2-Good
Arsenic Salts B-Good
Asphalt A1-Excellent
Barium Carbonate B2-Good
Barium Chloride A1-Excellent
Barium Cyanide B-Good
Barium Hydroxide B2-Good
Barium Nitrate B2-Good
Barium Sulfate B2-Good
Barium Sulfide B2-Good
Beer A2-Excellent
Beet Sugar Liquids A1-Excellent
Benzaldehyde A1-Excellent
Benzene C1-Fair
Benzene Sulfonic Acid A1-Excellent
Benzoic Acid A1-Excellent
Benzol C1-Fair
Benzonitrile N/A
Benzyl Chloride N/A
Bleaching Liquors A1-Excellent
Borax (Sodium Borate) A2-Excellent
Boric Acid A2-Excellent
Brewery Slop N/A
Bromine D-Severe Effect
Butadiene D-Severe Effect
Butane C1-Fair
Butanol (Butyl Alcohol) B2-Good
Butter N/A
Buttermilk A1-Excellent
Butyl Amine C1-Fair
Butyl Ether N/A
Butyl Phthalate C1-Fair
Butylacetate C1-Fair
Butylene B1-Good
Butyric Acid D-Severe Effect
Calcium Bisulfate N/A
Calcium Bisulfide B1-Good
Calcium Bisulfite A1-Excellent
Calcium Carbonate B1-Good
Calcium Chlorate N/A
Calcium Chloride B2-Good
Calcium Hydroxide A2-Excellent
Calcium Hypochlorite A1-Excellent
Calcium Nitrate A1-Excellent
Calcium Oxide B1-Good
Calcium Sulfate B1-Good
Calgon N/A
Cane Juice N/A
Carbolic Acid (Phenol) D-Severe Effect
Carbon Bisulfide N/A
Carbon Dioxide (dry) A1-Excellent
Carbon Dioxide (wet) A1-Excellent
Carbon Disulfide C1-Fair
Carbon Monoxide A2-Excellent
Carbon Tetrachloride D-Severe Effect
Carbon Tetrachloride (dry) D-Severe Effect
Carbon Tetrachloride (wet) N/A
Carbonated Water A-Excellent
Carbonic Acid B2-Good
Catsup N/A
Chloric Acid N/A
Chlorinated Glue N/A
Chlorine (dry) D-Severe Effect
Chlorine Water B1-Good
Chlorine, Anhydrous Liquid D-Severe Effect
Chloroacetic Acid D-Severe Effect
Chlorobenzene (Mono) C1-Fair
Chlorobromomethane A-Excellent
Chloroform C1-Fair
Chlorosulfonic Acid D-Severe Effect
Chocolate Syrup N/A
Chromic Acid 10% D-Severe Effect
Chromic Acid 30% D-Severe Effect
Chromic Acid 5% D-Severe Effect
Chromic Acid 50% D-Severe Effect
Chromium Salts B-Good
Cider B-Good
Citric Acid D-Severe Effect
Citric Oils N/A
Cloroxr (Bleach) N/A
Coffee N/A
Copper Chloride N/A
Copper Cyanide B2-Good
Copper Fluoborate N/A
Copper Nitrate B2-Good
Copper Sulfate>5% A2-Excellent
Copper Sulfate 5% A2-Excellent
Cream N/A
Cresols C1-Fair
Cresylic Acid B1-Good
Cupric Acid B1-Good
Cyanic Acid N/A
Cyclohexane B1-Good
Cyclohexanone D-Severe Effect
Detergents D-Severe Effect
Diacetone Alcohol A-Excellent
Dichlorobenzene N/A
Dichloroethane C1-Fair
Diesel Fuel C1-Fair
Diethyl Ether N/A
Diethylamine D-Severe Effect
Diethylene Glycol B2-Good
Dimethyl Aniline N/A
Dimethyl Formamide A-Excellent
Diphenyl N/A
Diphenyl Oxide N/A
Dyes N/A
Epsom Salts (Magnesium Sulfate) A2-Excellent
Ethane N/A
Ethanol B-Good
Ethanolamine N/A
Ether D-Severe Effect
Ethyl Acetate A-Excellent
Ethyl Benzoate C2-Fair
Ethyl Chloride C1-Fair
Ethyl Ether D-Severe Effect
Ethyl Sulfate N/A
Ethylene Bromide D-Severe Effect
Ethylene Chloride D-Severe Effect
Ethylene Chlorohydrin D-Severe Effect
Ethylene Diamine A-Excellent
Ethylene Dichloride D-Severe Effect
Ethylene Glycol A2-Excellent
Ethylene Oxide A-Excellent
Fatty Acids D-Severe Effect
Ferric Chloride A1-Excellent
Ferric Nitrate A2-Excellent
Ferric Sulfate A2-Excellent
Ferrous Chloride A2-Excellent
Ferrous Sulfate A2-Excellent
Fluoboric Acid A2-Excellent
Fluorine D-Severe Effect
Fluosilicic Acid A2-Excellent
Formaldehyde 100% B-Good
Formaldehyde 40% D-Severe Effect
Formic Acid D-Severe Effect
Freon 113 N/A
Freon 12 A1-Excellent
Freon 22 N/A
Freon TF N/A
Freonr 11 C-Fair
Fruit Juice A-Excellent
Fuel Oils B-Good
Furan Resin D-Severe Effect
Furfural D-Severe Effect
Gallic Acid A-Excellent
Gasoline (high-aromatic) A-Excellent
Gasoline, leaded, ref. N/A
Gasoline, unleaded N/A
Gelatin A2-Excellent
Glucose A2-Excellent
Glue, P.V.A. A1-Excellent
Glycerin A1-Excellent
Glycolic Acid A2-Excellent
Gold Monocyanide N/A
Grape Juice B-Good
Grease N/A
Heptane B1-Good
Hexane D-Severe Effect
Honey B-Good
Hydraulic Oil (Petro) C-Fair
Hydraulic Oil (Synthetic) A-Excellent
Hydrazine N/A
Hydrobromic Acid 100% B1-Good
Hydrobromic Acid 20% B2-Good
Hydrochloric Acid 100% N/A
Hydrochloric Acid 20% A2-Excellent
Hydrochloric Acid 37% B2-Good
Hydrochloric Acid, Dry Gas A2-Excellent
Hydrocyanic Acid A2-Excellent
Hydrocyanic Acid (Gas 10%) N/A
Hydrofluoric Acid 100% N/A
Hydrofluoric Acid 20% A2-Excellent
Hydrofluoric Acid 50% A1-Excellent
Hydrofluoric Acid 75% C1-Fair
Hydrofluosilicic Acid 100% B1-Good
Hydrofluosilicic Acid 20% B2-Good
Hydrogen Gas A2-Excellent
Hydrogen Peroxide 10% A-Excellent
Hydrogen Peroxide 100% C2-Fair
Hydrogen Peroxide 30% C2-Fair
Hydrogen Peroxide 50% C2-Fair
Hydrogen Sulfide (aqua) A-Excellent
Hydrogen Sulfide (dry) A-Excellent
Hydroquinone A-Excellent
Hydroxyacetic Acid 70% A-Excellent
Ink N/A
Iodine A1-Excellent
Iodine (in alcohol) B-Good
Iodoform N/A
Isooctane B-Good
Isopropyl Acetate B1-Good
Isopropyl Ether B-Good
Isotane N/A
Jet Fuel (JP3, JP4, JP5) D-Severe Effect
Kerosene C1-Fair
Ketones C1-Fair
Lacquer Thinners A-Excellent
Lacquers A-Excellent
Lactic Acid A1-Excellent
Lard A-Excellent
Latex N/A
Lead Acetate A2-Excellent
Lead Nitrate A2-Excellent
Lead Sulfamate A1-Excellent
Ligroin A-Excellent
Lime A-Excellent
Linoleic Acid A-Excellent
Lithium Chloride A2-Excellent
Lithium Hydroxide N/A
Lubricants D-Severe Effect
Lye: Ca(OH)2 Calcium Hydroxide A2-Excellent
Lye: KOH Potassium Hydroxide A-Excellent
Lye: NaOH Sodium Hydroxide D-Severe Effect
Magnesium Bisulfate N/A
Magnesium Carbonate B-Good
Magnesium Chloride A1-Excellent
Magnesium Hydroxide A2-Excellent
Magnesium Nitrate A2-Excellent
Magnesium Oxide N/A
Magnesium Sulfate (Epsom Salts) A2-Excellent
Maleic Acid B2-Good
Maleic Anhydride D-Severe Effect
Malic Acid B2-Good
Manganese Sulfate A1-Excellent
Mash A-Excellent
Mayonnaise D-Severe Effect
Melamine N/A
Mercuric Chloride (dilute) A-Excellent
Mercuric Cyanide A-Excellent
Mercurous Nitrate A-Excellent
Mercury A-Excellent
Methane N/A
Methanol (Methyl Alcohol) A1-Excellent
Methyl Acetate B1-Good
Methyl Acetone N/A
Methyl Acrylate N/A
Methyl Alcohol 10% A1-Excellent
Methyl Bromide C1-Fair
Methyl Butyl Ketone N/A
Methyl Cellosolve N/A
Methyl Chloride C1-Fair
Methyl Dichloride N/A
Methyl Ethyl Ketone D-Severe Effect
Methyl Ethyl Ketone Peroxide N/A
Methyl Isobutyl Ketone C-Fair
Methyl Isopropyl Ketone D-Severe Effect
Methyl Methacrylate N/A
Methylamine A1-Excellent
Methylene Chloride D-Severe Effect
Milk A-Excellent
Mineral Spirits B-Good
Molasses A-Excellent
Monochloroacetic acid N/A
Monoethanolamine C-Fair
Morpholine N/A
Motor oil C1-Fair
Mustard A-Excellent
Naphtha A1-Excellent
Naphthalene C-Fair
Natural Gas A-Excellent
Nickel Chloride A-Excellent
Nickel Nitrate A-Excellent
Nickel Sulfate A-Excellent
Nitrating Acid (<15% HNO3) N/A
Nitrating Acid (>15% H2SO4) N/A
Nitrating Acid (S1% Acid) N/A
Nitrating Acid (S15% H2SO4) N/A
Nitric Acid (20%) C-Fair
Nitric Acid (50%) B1-Good
Nitric Acid (5-10%) B-Good
Nitric Acid (Concentrated) C1-Fair
Nitrobenzene C1-Fair
Nitrogen Fertilizer N/A
Nitromethane A-Excellent
Nitrous Acid N/A
Nitrous Oxide C-Fair
Oils: Aniline N/A
Oils: Anise N/A
Oils: Bay N/A
Oils: Bone N/A
Oils: Castor N/A
Oils: Cinnamon D-Severe Effect
Oils: Citric A-Excellent
Oils: Clove N/A
Oils: Coconut A-Excellent
Oils: Cod Liver N/A
Oils: Corn A-Excellent
Oils: Cottonseed A-Excellent
Oils: Creosote C-Fair
Oils: Fuel (1, 2, 3, 5A, 5B, 6) B-Good
Oils: Ginger N/A
Oils: Hydraulic Oil (Petro) C-Fair
Oils: Hydraulic Oil (Synthetic) A-Excellent
Oils: Lemon N/A
Oils: Linseed A-Excellent
Oils: Mineral B1-Good
Oils: Olive A1-Excellent
Oils: Orange C1-Fair
Oils: Palm A-Excellent
Oils: Peanut A-Excellent
Oils: Peppermint N/A
Oils: Pine D-Severe Effect
Oils: Rapeseed D-Severe Effect
Oils: Rosin B2-Good
Oils: Sesame Seed N/A
Oils: Silicone A-Excellent
Oils: Soybean A1-Excellent
Oils: Sperm (whale) N/A
Oils: Tanning N/A
Oils: Transformer C1-Fair
Oils: Turbine C-Fair
Oleic Acid C2-Fair
Oleum 100% D-Severe Effect
Oleum 25% D-Severe Effect
Oxalic Acid (cold) A2-Excellent
Ozone C1-Fair
Palmitic Acid N/A
Paraffin B-Good
Pentane D-Severe Effect
Perchloric Acid B-Good
Perchloroethylene D-Severe Effect
Petrolatum B-Good
Petroleum C1-Fair
Phenol (10%) B-Good
Phenol (Carbolic Acid) D-Severe Effect
Phosphoric Acid (>40%) B1-Good
Phosphoric Acid (crude) B1-Good
Phosphoric Acid (molten) N/A
Phosphoric Acid (S40%) A-Excellent
Phosphoric Acid Anhydride N/A
Phosphorus B-Good
Phosphorus Trichloride B-Good
Photographic Developer A-Excellent
Photographic Solutions A-Excellent
Phthalic Acid B2-Good
Phthalic Anhydride N/A
Picric Acid A-Excellent
Plating Solutions, Antimony Plating 130°F N/A
Plating Solutions, Arsenic Plating 110°F N/A
Plating Solutions (Brass): High-Speed Brass Bath 110°F B-Good
Plating Solutions (Brass): Regular Brass Bath 100°F B-Good
Plating Solutions (Bronze): Cu-Cd Bronze Bath R.T. N/A
Plating Solutions (Bronze): Cu-Sn Bronze Bath 160°F N/A
Plating Solutions (Bronze): Cu-Zn Bronze Bath 100°F N/A
Plating Solutions (Cadmium): Cyanide Bath 90°F N/A
Plating Solutions (Cadmium): Fluoborate Bath 100°F N/A
Plating Solutions, (Chromium): Barrel Chrome Bath 95°F N/A
Plating Solutions, (Chromium): Black Chrome Bath 115°F N/A
Plating Solutions, (Chromium): Chromic-Sulfuric Bath 130°F N/A
Plating Solutions, (Chromium): Fluoride Bath 130°F N/A
Plating Solutions, (Chromium): Fluosilicate Bath 95°F N/A
Plating Solutions (Copper) (Acid): Copper Fluoborate Bath 120°F N/A
Plating Solutions (Copper) (Acid): Copper Sulfate Bath R.T. N/A
Plating Solutions (Copper) (Cyanide): Copper Strike Bath 120°F N/A
Plating Solutions (Copper) (Cyanide): High-Speed Bath 180°F N/A
Plating Solutions (Copper) (Cyanide): Rochelle Salt Bath 150°F N/A
Plating Solutions (Copper) (Misc): Copper (Electroless) N/A
Plating Solutions (Copper) (Misc): Copper Pyrophosphate N/A
Plating Solutions (Gold): Acid 75°F N/A
Plating Solutions (Gold): Cyanide 150°F N/A
Plating Solutions (Gold): Neutral 75°F N/A
Plating Solutions, Indium Sulfamate Plating R.T. N/A
Plating Solutions (Iron): Ferrous Am Sulfate Bath 150°F N/A
Plating Solutions (Iron): Ferrous Chloride Bath 190°F N/A
Plating Solutions (Iron): Ferrous Sulfate Bath 150°F N/A
Plating Solutions (Iron): Fluoborate Bath 145°F N/A
Plating Solutions (Iron): Sulfamate 140°F N/A
Plating Solutions (Iron): Sulfate-Chloride Bath 160°F N/A
Plating Solutions, Lead Fluoborate Plating N/A
Plating Solutions, (Nickel): Electroless 200°F N/A
Plating Solutions, (Nickel): Fluoborate 100-170°F N/A
Plating Solutions, (Nickel): High-Chloride 130-160°F N/A
Plating Solutions, (Nickel): Sulfamate 100-140°F N/A
Plating Solutions, (Nickel): Watts Type 115-160°F N/A
Plating Solutions (Rhodium) 120°F N/A
Plating Solutions, (Silver) 80-120°F N/A
Plating Solutions, Tin-Fluoborate Plating 100°F N/A
Plating Solutions, Tin-Lead Plating 100°F N/A
Plating Solutions (Zinc): Acid Chloride 140°F N/A
Plating Solutions (Zinc): Acid Fluoborate Bath R.T. N/A
Plating Solutions (Zinc): Acid Sulfate Bath 150°F N/A
Plating Solutions (Zinc): Alkaline Cyanide Bath R.T. N/A
Potash (Potassium Carbonate) A1-Excellent
Potassium Bicarbonate A-Excellent
Potassium Bromide A-Excellent
Potassium Chlorate A1-Excellent
Potassium Chloride A1-Excellent
Potassium Chromate A-Excellent
Potassium Cyanide Solutions A-Excellent
Potassium Dichromate A-Excellent
Potassium Ferricyanide A2-Excellent
Potassium Ferrocyanide A1-Excellent
Potassium Hydroxide (Caustic Potash) A-Excellent
Potassium Hypochlorite C1-Fair
Potassium Iodide B1-Good
Potassium Nitrate A-Excellent
Potassium Oxalate N/A
Potassium Permanganate A-Excellent
Potassium Sulfate A2-Excellent
Potassium Sulfide A2-Excellent
Propane (liquefied) C1-Fair
Propylene N/A
Propylene Glycol B2-Good
Pyridine B1-Good
Pyrogallic Acid N/A
Resorcinal B2-Good
Rosins B1-Good
Rum N/A
Rust Inhibitors N/A
Salad Dressings N/A
Salicylic Acid B2-Good
Salt Brine (NaCl saturated) A-Excellent
Sea Water A2-Excellent
Shellac (Bleached) A1-Excellent
Shellac (Orange) A1-Excellent
Silicone N/A
Silver Bromide A-Excellent
Silver Nitrate A-Excellent
Soap Solutions D-Severe Effect
Soda Ash (see Sodium Carbonate) B-Good
Sodium Acetate A-Excellent
Sodium Aluminate N/A
Sodium Benzoate A2-Excellent
Sodium Bicarbonate A2-Excellent
Sodium Bisulfate A2-Excellent
Sodium Bisulfite A2-Excellent
Sodium Borate (Borax) A2-Excellent
Sodium Bromide A2-Excellent
Sodium Carbonate B2-Good
Sodium Chlorate B2-Good
Sodium Chloride A2-Excellent
Sodium Chromate N/A
Sodium Cyanide A2-Excellent
Sodium Ferrocyanide A-Excellent
Sodium Fluoride A2-Excellent
Sodium Hydrosulfite N/A
Sodium Hydroxide (20%) D-Severe Effect
Sodium Hydroxide (50%) D-Severe Effect
Sodium Hydroxide (80%) D-Severe Effect
Sodium Hypochlorite (<20%) A-Excellent
Sodium Hypochlorite (100%) B2-Good
Sodium Hyposulfate N/A
Sodium Metaphosphate A1-Excellent
Sodium Metasilicate N/A
Sodium Nitrate A2-Excellent
Sodium Perborate A1-Excellent
Sodium Peroxide A-Excellent
Sodium Polyphosphate A-Excellent
Sodium Silicate A2-Excellent
Sodium Sulfate A2-Excellent
Sodium Sulfide A2-Excellent
Sodium Sulfite B1-Good
Sodium Tetraborate A2-Excellent
Sodium Thiosulfate (hypo) A1-Excellent
Sorghum N/A
Soy Sauce N/A
Stannic Chloride A2-Excellent
Stannic Fluoborate N/A
Stannous Chloride B2-Good
Starch B-Good
Stearic Acid B1-Good
Stoddard Solvent C2-Fair
Styrene N/A
Sugar (Liquids) N/A
Sulfate (Liquors) A2-Excellent
Sulfur Chloride C1-Fair
Sulfur Dioxide B1-Good
Sulfur Dioxide (dry) A1-Excellent
Sulfur Hexafluoride B-Good
Sulfur Trioxide N/A
Sulfur Trioxide (dry) C1-Fair
Sulfuric Acid (<10%) A1-Excellent
Sulfuric Acid (10-75%) A1-Excellent
Sulfuric Acid (75-100%) B1-Good
Sulfuric Acid (cold concentrated) C-Fair
Sulfuric Acid (hot concentrated) D-Severe Effect
Sulfurous Acid B2-Good
Sulfuryl Chloride N/A
Tallow C-Fair
Tannic Acid B2-Good
Tanning Liquors A1-Excellent
Tartaric Acid A1-Excellent
Tetrachloroethane N/A
Tetrachloroethylene B-Good
Tetrahydrofuran C1-Fair
Tin Salts N/A
Toluene (Toluol) C1-Fair
Tomato Juice A1-Excellent
Trichloroacetic Acid A-Excellent
Trichloroethane N/A
Trichloroethylene D-Severe Effect
Trichloropropane N/A
Tricresylphosphate B1-Good
Triethylamine N/A
Trisodium Phosphate A-Excellent
Turpentine D-Severe Effect
Urea A-Excellent
Uric Acid B-Good
Urine A2-Excellent
Varnish A-Excellent
Vegetable Juice N/A
Vinegar A-Excellent
Vinyl Acetate A-Excellent
Vinyl Chloride N/A
Water, Acid, Mine A2-Excellent
Water, Deionized N/A
Water, Distilled A2-Excellent
Water, Fresh A2-Excellent
Water, Salt A2-Excellent
Weed Killers N/A
Whey N/A
Whiskey & Wines C-Fair
White Liquor (Pulp Mill) A2-Excellent
White Water (Paper Mill) N/A
Xylene B-Good
Zinc Chloride A1-Excellent
Zinc Hydrosulfite N/A
Zinc Sulfate A2-Excellent

Explanation of Footnotes
1. Satisfactory to 72°F (22°C)
2. Satisfactory to 120°F (48°C)

Ratings: Chemical Effect
A = Excellent.
B = Good, Minor Effect, slight corrosion or discoloration
C = Fair, Moderate Effect, not recommended for continuous use. Softening, loss of strength, or swelling may occur.
D = Severe Effect, not recommended for ANY use.
N/A = Information not available.

CAUTION: Variations in chemical behavior during handling due to factors such as temperature, pressure, and concentrations can cause equipment to fail, even though it passed an initial test.

Shop LDPE