Centrifuge Tubes, 15mL PerformR®, Autoclavable, Plug-Style Caps, Sterile to 10(-6), 25 per Rack, case/300

15 mL PerformR® Centrifuge Tubes with Plug Style Caps, 25 per Rack, Sterile. Packaged in 6 Plastic Racks of 50.

High quality USA-Made PerformR® centrifuge tubes provide reliable performance in all major centrifuges and offer higher spin rates are higher than most popular brands. Manufactured from lab-certified non-cyto-toxic medical grade resins, they come in various packaging including low-waste fiberboard racks, reusable polypropylene racks, and sterile bulk bags. All our sterile products use medical grade packaging and are radiation sterilized following a validated ISO 11137 method to a sterility assurance level of 10-6.

Specifications

• Conical centrifuge tube
• PerformR®
• 15 mL
• Sterile
• With attached plug style screw caps
• Black printed graduations and white writing spot
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Validated Sterilization (ISO 11137) for use in Research and Medical labs
• Polypropylene USP Class VI resin
• Centrifuging to 12,500 x G
• Freezable to -80C
• Autoclavable
• Capacity: 15 mL
• Teal or Purple color caps
• 25 tubes per reusable polypropylene rack/2 racks per pack/6 packs per case
• 17 mm W. 118 mm H.
• Made in USA

	Endotoxin Free (Non pyrogenic) Product samples are exposed to endotoxin-free water and the resulting extraction fluid is tested for contamination using the kinetic turbidimetric Limulus Amoebocyte Lysate (LAL) assay protocol and USP guidelines. All products tested must display less than 0.05 EU/ml to be certified free of endotoxin.
	Nuclease Free (RNase/DNase) Product samples are exposed to nuclease-free water and the resulting extraction fluid is tested for nuclease activity on commercially available 7.5 kb Poly(A) tailed RNA (1µg) and HindIII-digested DNA (1µg) with a one hour 37°C incubation in appropriate buffers. Results are visualized on an agarose gel with appropriate positive and negative controls. Extraction fluid samples must show no degradation of the nucleic acids by the extraction fluid has occurred for the product to be certified as RNase-free and DNase-free
	Adenosine Triphosphate (ATP) Product sample surfaces are tested for the presence of adenosine triphosphate (ATP) using a controlled bioluminescence reaction to detect contamination. Luminescence data is compared to results generated by ATP-free surfaces and surfaces with known amounts of ATP as a positive control. The relative light units result must indicate less than 2 X 10-12 mg/µl of ATP for the product to be certified as ATP free.
	Heavy Metals Free Heavy metals have been tested for using the prescribed USP method and confirmed to have levels lower than 1 part per million (1ppm)
	Validated Sterilization Labcon products are sterilized by radiation sterilization within a dose range of 12-35 kGy. The dose range necessary for the stated sterility assurance level is continuously audited through quarterly bio-burden and sterility validation studies performed according to the ANSI/AAMI/ISO 11137 standard by an independent laboratory. This dosage is sufficient to guarantee a sterility assurance level of 10-6.

	Bovine Spongiform Encephalopathy-Transmissible Spongiform Encephalopathy These products contain resins that are processed under conditions proven to exceed the European Union standard as listed in the 22nd Commission Directive EC 98/16/EC of March 5th, 1998 as annexed to council Directive EC 76/768/EEC and further Amendment 419 Annex II of 12 June 2001.
	Medical Grade (USP) U.S Pharmacoepia Methods and Guidelines (U.S.P Class VI) are used if applicable. We only use medical grade resins and pre-test all resins for contaminants prior to use. Resins are compliant with FDA CFR title 21-177.1520, 178.3295, 178.3297.
	California Prop 65 No Labcon manufactured disposables contain any of the “listed chemicals” as referenced in the California Safe Drinking Water and Toxic Enforcement Act of 1986, (Prop 65) as revised May 25, 2018.
	Phthalates & Oleamide All our resins are medical grade and are certified free of Bisphenol A (BPA), Oleamide, DiHEMDA, and Phthalates.
	Substances of Very High Concern & REACH All Labcon products are compliant with RoHS Directive 2002/95/EC/-2011/65-2015/863, are free of Substances of Very High Concern (SVHC), and are EU REACH Regulation (EC) No 1907/2006 compliant.
	Origin These products are Made in USA and all components meet the requirements for US origin under the NAFTA agreement.

	U.S. FDA Registered Labcon is a U.S. FDA registered medical device manufacturer. Our facility is registered by the U.S. government to comply with CFR21 GMP regulations for manufacturing medical devices.
	CE Compliant As applicable Labcon products meet the requirements for CE marking under regulation 2017/746.
	ISO 9001 Quality Registration Labcon has been registered to the ISO 9001 quality management system standar since 1997 and maintains registration to ISO 9001:2015.