ADA Tile, 1 x 1 Detectable Warning Mat, Retrofit Model

1 foot square ADA Tiles are sold by the each or as a case of 16(please contact us for a case purchase), with anchors and sealant included. Surface Applied, Retrofit ADA Tiles are engineered to successfully upgrade any existing surface to comply with Federally mandated detectable warning requirements. Standard Colors are Federal Yellow, Colonial Red (red-brown), Brick Red (bright red), Dark Gray, and Black. Other custom order colors have a longer lead time and are by quote only. Made in the U.S.A.

• Includes: Anchors, Sealant
• Style: Surface Mount/ Retrofit
• Made of Polymer Composite Fiber Glass (Plastic Tile, not flexible).

ADA Compliant Detectable Warning Tiles

• 2.35" center-to-center, in-line dome spacing meets ADA Federal and most state requirements
• Truncated dome size and spacing compliant with ADA Federal and State requirements, 0.9" base and 0.45" top diameter
• Fully complies with all ADA and OHSA requirements for surface height transitions to eliminate trip hazards
• Consistent dome spacing when tiles are adjoined (side-by-side or end-to-end)
• Wide in-line dome configuration facilitates a smooth rolling transition for strollers, wheelchairs and walkers

Intelligent Design Features

• Audible detectable warning technology engineered for sound amplification
• Engineered to transfer loads directly through domes and into substrate, minimizing the possibility of damage
• Beveled perimeter edge meets ADA vertical displacement requirements
• Strategically placed pre-formed fastener hole locations enhance installation integrity and provide easy installation
• Tiles shipped with color-matched fasteners
• Adhesive location identified on reverse side of tile for easy, error-free installation
• Tactile Bond/Sealant is available through all our authorized distributors. The system is designed and tested to be both a structural adhesive and perimeter edge sealant.
• Interactive sizes - all tiles maintain pattern repeat when mounted side-to-side or top-to-bottom

ASTM & UL testing

• Tensile Strength ASTM D 638
• Flexural Strength ASTM D 790
• Compressive Strength ASTM D 695
• Accelerated Weathering ASTM G 155
• Slip Resistance ASTM C 1028
• Flame Spread Index ASTM E 84

R304.1.4 Curb Ramp and Size of Detectable Warning Area
- Full width of ramp excluding flares
- 24" minimum in the direction of travel

R304.2.1 Perpendicular Curb Ramps
- Grade break less than 5 feet from back of curb
- Grade break greater than 5 feet from back of curb

R304.2.2 Landings and Blended Transitions
- Located on landing or blended transition at back of curb
- 24" in the direction of travel

R304.2.3 Rail Crossing
- Edge nearest rail crossing is 6 feet minimum and 15 feet maximum from center line of the nearest rail
- Truncated domes shall be aligned to be parallel with the direction of wheelchair travel

R305.4 Medians and Pedestrian Refuge Islands
- Shall have detectable warnings that comply with R304 at ramps and blended transitions
- At cut through islands at curb line in-line with face of curb and shall be separated by a 2 foot minimum length of walkway without detectable warnings.