HazMat Drum Storage Locker with Optional Fire Rating, 6-Drum

HazMat Drum Storage Locker with Optional Fire Rating, 6 Drum.

Specifically designed for outdoor hazardous material storage and dispensing from 55-gallon drums containing flammable or combustible liquids. Outer wall is constructed of all-welded 16 or 12 gauge steel. Inner wall is constructed of 20 gauge steel. The double wall construction contains 3" of air space throughout. All Hazmat Storage Buildings are designed in accordance with the standards set forth by NFPA Code 30 and comply with OSHA and EPA regulations. All models are FM Approved for the storing and dispensing of flammable and combustible liquids. All electrical installations are U.L. Approved & Compliant to 1999 & 2002 NEC.

Approvals

• Complies with EPA & current OSHA regulations
• FM-Factory Mutual Approved
• NFPA - Designed in accordance with specifications set forth by the National Fire Protection Association
• UL - Include UL listed electrical accessories

Dimensions: 8'4"H x 7'W x 5'D
Approximate Ship Weight: 2,061 lbs

Door Style: 1-42" W x 80" H door installed with a UL Classified commercial grade keyed lockset. The door shall serve as personnel entrance and exit.

Standard Design Features

The chart below lists the standard features that are included with these buildings. Details of each feature are listed below the table.

Interlocking Wall Structure - Securall® Chemical Storage Buildings are designed using Interlocking Wall Sections which provide superior strength and durability.

Exterior Wall Construction - Securall® HazMat Storage Buildings are all-welded using 12 or 16 gauge galvannealed steel outer walls and 20 gauge cold rolled steel inner walls provide maximum durability, weather resistance, and rigidity.

Safety Floor Planking - Slip resistant planking 13" wide, 12 gauge galvanized steel with raised perforated buttons and debossed holes protruding down. Galvanized steel floor planking above sump area for maximum corrosion resistance. Floor planking designed to sustain a minimum uniformly distributed load of 250 pounds per square foot. Floor planking and supports are removable to facilitate sump cleaning in the event of a spill.

Upgrades Available

Hurricane Resistant Walls - These buildings are available in hurricane rated and have been tested to determine the amount of force they can withstand and were shown to withstand F-4 tornado force winds of 250 mph. The chart below demonstrates the wind speed that a particular length of wall will resist. Upgrade package is available for Tornado Resistant Walls.

Explosion Relief Panels - Used in the construction of buildings designed for the storage and dispensing of Class IA and Class IB flammable liquids. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf.

Fire Rating - FM Approved Fire Rated Wall & Roof Design Tested at Intertek Testing Laboratory
Fire-Rated Storage Buildings (8'4"H X 42'W X 9'D Max Dimensions) carry the Factory Mutual System Approval label and have an FM Approved Fire Rated Wall & Roof Design. Wall and roof are tested at Intertek Testing Laboratories. Storage buildings are constructed based upon UL Fire Resistance Ratings classification criteria. Check with your local authority having jurisdiction for correct wall/roof rating needed. In addition, all Fire-Rated Buildings come with hydraulic operated Self-Close, fire-rated doors and fire damper protected vents.

• Standard models are available in 2-hour and 4-hour fire ratings
• Wall ratings are either 2 or 4 hour fire rated
• Roof ratings are either 1.5 or 3 hour fire rated )

2 Hour Fire Rated wall construction built with 1.5 hour fire rated roof construction, 1.5 hour fire rated door construction, and 2 hr wall design. Air inlet vents with UL Classified and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Classified 165° F fusible link.

4 Hour Fire Rated wall construction built with 3 hour fire rated roof construction, 3 hour fire rated door construction, and 4 hr wall design. Air inlet vents with UL Classified and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Classified 165° F fusible link.

Many other upgrades are available, including:

• Steel or Aluminum Ramps
• Electrical Classification
• Explosion-Proof Light with Switch (interior or exterior)
• Dust/Vapor Resistant Lights
• Explosion-Proof Heater (6,143 BTU, 12,286 BTU, 24,000 BTU, 10,000 BTU, 25,600 BTU, 34,100 BTU)
• Explosion-Proof Air Conditioner (19,000 BTU)
• Temperature Switch (to activate accessories, sold separately)
• R-11 Insulation
• Dry Chemical Fire Suppression System
• Dry Chemical Alarm
• Sprinkler System - One or Three Heads
• Fire Department Hose Connection
• Liquid Level Detector with Alarm
• Sump Liner
• Door and Exit Upgrades
• Eyewash Stations
• Sump Drain with lockable valve or drain only
• Custom paint
• Primer coat for saltwater
• Fusible link hold open, door closer
• Solar panels
• And much more!

Please call us toll free at (888) 322-5722 or email at info@cplabsafety.com for a more accurate quote with all the options you require.