14 Liter Lab Armor® Bead Bath, 120V, Supplied with 12L of Bath Beads

14L Bead Bath, 120V, Supplied with 12L of Bath Beads. (Contact us for a quote for 230V model.) Get your bead bath up and running fast! You never need to turn it off because there is nothing to evaporate. This trusty, always-on incubator is unlike your typical bead-filled, water bath because the Lab Armor® Bead Bath allows you to achieve a new set temperature quickly, without long warm up delays, so you can make quick adjustments on the fly. Temperatures will be consistent and uniform everywhere in the bath. The thermal uniformity is ± 0.5°C at 37°C and ±1.0 at 65°C.

• What comes In the Box: Digital Bead Bath, Lab Armor Beads (ships separately), Power adapter, Stainless lid, and Documentation
• Thermal Uniformity: +/- 1.0°C at 37°C
• Temperature Range: Ambient +5°C to 80°C
• Sensors: Thermocouple located inside tub

The Eco-friendly Bead Bath: State of the art design. Breakthrough Contamination Control. Three sizes. No more harmful germicides.  50% more energy efficient than a lab water bath.
THE DESIGN BEHIND THE  Bead Bath. Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.                    
​
Uniform Temperatures: It’s all about a good design.  With Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is  +/-1.0 at 37ºC.
​
Always On: It’s always on, ready to use. You never need to turn it off. There is nothing to evaporate. It’s just like a trusty always-on incubator. Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm-up delays, so you can make fast adjustments.

The Lab Armor Beads

Lab Armor® Beads are dry metallic thermal beads designed to replace water in laboratory water baths, aluminum blocks in dry baths, and ice in ice buckets. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor™ bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk.

For best performance, use product at an operating temperature of -80°C to 180°C. However, product may be used up to 300°C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for specific recommendations.